Publications
Jump to:
Industry Sectors
Pollution Prevention Policies & Programs
Innovative P2 Technology Profiles
Environmental Management Accounting
Northeast Pollution Prevention & Sustainability News (formerly the Northeast Assistance & Pollution Prevention News) covered P2, sustainability, and compliance assistance topics and activities of government programs at all levels in the Northeast. Free.
2009. 49pp.
Presents a strategy for mitigating and adapting to climate change through improving waste prevention and recycling initiatives, increasing renewable energy on contaminated sites, implementing "greener" site remediation, and improving management and recycling of disaster debris.
1999. 15pp.
Provides a baseline of metrics that P2 programs can utilize to help facilitate multi-state studies of results, such as Pollution Prevention Progress in the Northeast.
1999. 12pp.
Presents recommendations to EPA on integrating P2 into the MACT program.
1998. 112pp.
Presents the results of a study of P2 program activities for the Northeast states.
1998. 54pp.
Describes P2 programs and recommends national network.
Industry Sectors
Adhesives
Pressure Sensitive Tapes & Labels: The Clean Air Act Amendments of 1990 & Pollution Prevention Opportunities [PDF]
1999. 94pp. +app.
Covers regulations and P2 options for pressure sensitive tape and label manufacturers.
Auto Repair
The Finishing Line: Q & A on Low VOC Compliant Coatings for Auto Body Shops [PDF]
1999. 4pp.
Covers applying low VOC paints at autobody shops.
Waste Oil Regulations: A Quick Guide for Auto Repair Shops
1998.
Covers state waste/used oil regulations and P2 options:
- Connecticut (English, Spanish)
- Maine
- Massachusetts (English, Spanish, Portuguese)
- New Hampshire
- Vermont
A Checklist for Auto Repair Shops [PDF]
1998. 2pp.
Provides a self-audit tool for regulatory compliance.
Metal Products
Pollution Prevention for Machining & Metal Fabrication: A Manual for Technical Assistance Providers [PDF]
2001. 98pp.
Provides an overview of the industry and environmental regulations, as well as information on innovative P2 technologies.
Pollution Prevention in Paints & Coatings Processes, A Manual for Technical Assistance Providers
1998. 121pp. + app.
Provides information for technical assistance providers on metal coatings and P2 options and alternatives.
Pollution Prevention in the Primary Metals Industry, A Manual for Technical Assistance Providers
1998. 35pp.
Provides information for technical assistance providers on primary metals manufacturing and P2 options and alternatives.
Pollution Prevention in Metal Finishing: A Manual for Technical Assistance Providers
1997. 170pp. + app.
Provides information for technical assistance providers on metal finishing and P2 options and alternatives.
Slideshow & Video: RCRA Compliance for Metal Finishing Facilities
1998.
Provides an overview of RCRA compliance and P2 for the metal finishing industry. Approximately 20 minutes long. To obtain a copy of the slideshow or video, contact the NEWMOA office.
Printing
Pollution Prevention, An Environmental Resource Guide for Off-set Lithographers
2000. CD-ROM.
Presents compliance and P2 information for offset lithographers including videos, case studies, and planning and options analysis tools. To obtain a copy of the CD, contact the NEWMOA office.
Pollution Prevention in Printing: A Manual for Technical Assistance Providers
1997. 130pp. + app.
Presents information for technical assistance providers on the printing industry.
Wood Furniture Finishing
A First Place Finish: An Environmental Guide for Vermont Wood Finishers
1999. 70pp.
Presents multi-media regulations and P2 for small wood furniture manufacturers.
A First Place Finish: An Environmental Guide for Maine Wood Finishers
1998. 70pp.
Presents multi-media regulations and P2 for small wood furniture manufacturers.
Wood Furniture: The Clean Air Act Amendments of 1990 & Pollution Prevention Opportunities [PDF]
1997. 89pp. + app.
Presents an overview of new regulations and P2 options for wood furniture manufacturers.
High Solids Topcoats & HVLP Spray Guns: Ethan Allen [PDF]
1997. 6pp.
Describes Ethan Allen's efforts to use new coatings and new equipment to reduce air emissions and operating costs.
Ultraviolet Radiation Cured Coatings & Aqueous-Based Coatings [PDF]
1997. 6pp.
Describes the Hussey Seating Company's efforts to use new coatings to reduce air emissions and operating costs.
Pollution Prevention Policies & Programs
Northeast Pollution Prevention & Sustainability News (formerly the Northeast Assistance & Pollution Prevention News) covered P2, sustainability, and compliance assistance topics and activities of government programs at all levels in the Northeast. Free.
2009. 49pp.
Presents a strategy for mitigating and adapting to climate change through improving waste prevention and recycling initiatives, increasing renewable energy on contaminated sites, implementing "greener" site remediation, and improving management and recycling of disaster debris.
1999. 15pp.
Provides a baseline of metrics that P2 programs can utilize to help facilitate multi-state studies of results, such as Pollution Prevention Progress in the Northeast.
1999. 12pp.
Presents recommendations to EPA on integrating P2 into the MACT program.
1998. 112pp.
Presents the results of a study of P2 program activities for the Northeast states.
1998. 54pp.
Describes P2 programs and recommends national network.
Innovative P2 Technology Profiles
2007. 14pp.
Describes enclosed spray gun washers that use alternative cleaners that reduce hazardous chemical use and the generation of hazardous waste and air emissions.
2006. 13pp.
Describes computer-to-plate (CTP) lithographic printing technologies that reduce chemical use and the generation of hazardous waste and wastewater.
2003. 19pp.
Describes closed-loop aqueous cleaning technologies that increase the useful life of cleaning agents and significantly reduce water use and wastewater generation.
2003. 14pp.
Describes trivalent chromium plating as a replacement for hexavalent chromium plating.
2001. 16pp.
Describes closed-loop vapor degreasing technologies that increase cleaning effectiveness and significantly reduce pollution.
Environmental Management Accounting
2003. 5pp.
Presents a case study in the roles of materials and cost accounting in an environmental management system.
3rd Edition. 1998. 85pp.
Describes methods for conducting financial assessment of P2 investment options at firms.
1996. 16pp.
1996. 16pp.
Helps lenders understand how P2 can enhance traditional loan evaluation criteria.
Last Modified 08/25/2020
Home
|
Pollution Prevention
|
Mercury
|
IMERC
|
Solid Waste
Hazardous Waste
|
Waste Site Cleanup
|
About NEWMOA
|
NEWMOA Members
Copyright 2024 NEWMOA, Northeast Waste Management Officials' Association
89 South Street, Suite 600; Boston, MA 02111-2651;
ph (617) 367-8558
fax (617) 367-0449
TDD/TTY (857) 265-3934
All Rights Reserved
Comments contact:
.